Removing Roadmaster Invisibrake Supplemental Braking From One Vehicle to Install on Another

Question:

When removing the Invisibrake from my 2004 Jeep Wrangler for installation in my 2018 Jeep Wrangler, what do I do with the line from the brake booster on the 2004 Jeep Wrangler? I am using the 2nd vehicle kit in the 2018 Jeep Wrangler.

asked by: Brian M

Expert Reply:

Because you are removing the Roadmaster Invisibrake Supplemental Braking System # RM-8700 from your 2004 Jeep Wrangler, you will need to seal up the vacuum line on your 2004 Wrangler. You can do this a couple of different ways. You can leave the T-connector and then add a bolt and hose clamp to seal the hose or you can remove the T-connector and use a coupler and two hose clamps to seal the hose. The latter is my recommendation for a cleaner fix and you can use the check valve already present as that coupler connection.

The second vehicle kit # RM-98700 is the best route to go to add the system to your 2018 Jeep Wrangler. Let me know if you have further questions.

expert reply by: Jason S