What Hubs Will Work with the Timbren Heavy-Duty Axle-Less Trailer Suspension Part # ASR35HDS02
Question:
would I be able to fit a 2003 Toyota Tacoma hub on a TIMBREN HD Axle less trailer suspension-4inch lift spindle?,ASR35HDS02
asked by: Patrick
Expert Reply:
The Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 uses a 25580 (1.750") inner bearing, 15123 (1.250") outer bearing, and 10-10 (2.125") grease seal. As long as the hub you are wanting to use has these bearings/seals then yes it will work for you. The bearing numbers should be stamped into the bearing but if not you can use a digital caliper like part # PTW80157 to measure them.
If you are looking for just an idler hub and your wheels use a 6 on 5-1/2" bolt pattern, I recommend using the Dexter Trailer Idler Hub part # 8-213-51 which is a confirmed fit and will work well for you.
Products Referenced in This Question
Dexter Trailer Idler Hub for 6,000-lb Axles - 6 on 5-1/2" - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 5 Bolt Flange - 3,500 lbs
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR C
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Q&A: Which Idler Hub for Timbren Axle-Less Suspension System
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Which Hubs Fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 with 2" Lift
- Search Results: dexter hub
- Search Results: 23585r16
- Shop: Brake Controller
- Video: Curt Echo Mobile Trailer Brake Controller Installation - 2020 Subaru Outback Wagon
- Video: Trailer Wiring Harness Installation - 2007 Kia Sportage
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: 2 inch coupler
- Search Results: coupler
- Q&A: 3,500 lb Trailer Axle Recommendation with 4 inch Drop
- Q&A: 3,500 lb Timbren Axle-Less Suspension System With Drop For Small Camper
- Q&A: Axle Recommendation for Building Low Profile Utility Trailer
- Q&A: Does 4 inch Drop For Timbren Axle Less Systems Mean the Trailer will Sit Closer to Ground
- Search Results: kia sportage
- Search Results: 7 way
- Q&A: Will Changing From Idler Hub to Hub/Drum Change Wheel Offset
- Video: TruRyde Electric Brake Assembly Installation
- Search Results: 2" coupler
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Video: Redarc Tow-Pro Elite Trailer Brake Controller Installation - 2019 Jeep Wrangler
- Video: Choosing the Right Brake Controller