Adding a Braking Axle to a 4x8 Trailer
Question:
Looking to add brakes to a small utility trailer. I intend to swap the axle assembly to accomplish this. My spring center is 48. Do you have a axle that is 60inch up to 72inch face to face that has brake mounts and related components to add brakes? Thanks
asked by: Shane
Expert Reply:
I do have an excellent option for you but it isn't a traditional axle. I recommend going with a Timbren axle-less system such as # TASR35HDS06 which takes the place of an axle beam. It will also replace the suspension with rubber suspension parts that won't wear out or corrode.
This system and others do have brake mounting flanges. I wasn't sure which capacity you would want so the one above is rated for 3,500 pounds. Then you could use hub and drum # 8-201-9UC3-EZ and brakes # AKEBRK-7-SA.
I have also included a link to all of the Timbren systems that have brake mounting flanges.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 2" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 2 Inch
- Timbren
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: Hanger Spacing Recommendation for Leaf Spring that is 25-1/4 inches Long
- Article: How to Measure a Trailer Axle
- Article: How to Raise Your Travel Trailer Height
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wiring configuration for Atwood GC6AA-10E Water Heater
- Q&A: Can Trailer Spindle be Bent Back In Place
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Determining Trailer Tongue Weight