Can Old Single Pivot HiJacker Ultra Slide be Converted to the Double Pivot Head

Question:

I ordered the parts to convert it and that part went beautifully. I ran into a little problem though. I went to have the hitch rail installed and they said they do not have frame brackets to mount the rails to. The rails that I have mount with one bolt on each side ( 2 bolts per rail). Do you know if there is a frame bracket kit to mount the Hijack Ultra slide rails with for a 2016 Dodge Ram short bed 4x4?

asked by: Chuck W

Expert Reply:

It looks like you have and older version of # DM6076P-UL-16K. I spoke with my contact over at Demco and he said that you can indeed replace the saddle on your hitch with # DM5990 and the head with # DM6076 to have a double pivot head to your hitch. No other parts will be needed.

expert reply by: Michael H

click to enlarge

Chuck

1/31/2018

Thank you for answer my question. I have one more question, does the replacement head come with the dampeners and would I need anything else to do the conversion.

Michael H.

1/31/2018

The rubber pieces that prevent the hitch head from clunking against the center section are included. You should not have to do anything else other than replace the 2 parts on your hitch with the 2 new parts using the same hardware!

Chuck

2/10/2018

Michael H.

2/12/2018

We do have a bracket kit that can be used with 4-bolt rails. If your Ram is a 1500 you can use bracket kit # HT31413. Please note the brackets listed above will not fit vehicles with factory Air Suspension system. If your Ram is a 2500 you can use kit # HT32556. If your Ram is a 3500 you can use kit # HT32221. If for whatever reason the brackets, or more specifically the mounting hardware, won't work with your rails then you would also need new rails, # HT30686.