Class II Ball Mount with Highest Rise Available for a 2018 Subaru Impreza
Question:
I am in need of a class 2, 1 1/4inch hitch ball mount with a 7inch rise for my 2018 Subaru Impreza. Do you have such a thing? Thank you.
asked by: Jerry M
Expert Reply:
The Class II ball mount we carry that's closest to the 7 inch rise you need is part # C45014. However, it only offers 5 inches of rise.
I've also attached our article on determining the amount of rise you need. You want to measure from the ground to the top of inside of your hitch receiver on your Subaru. Then compare that measurement with the distance from the ground to the underside of your trailer's coupler. The difference is the amount of rise you need. Just make sure both are parked on level ground before measuring.
If you do end up using the # C45014 ball mount the correct hitch balls to fit use a 3/4 inch diameter shank. You can use # C40018 if you need a 2 inch ball or # C40001 if you need a 1-7/8 inch ball.
The trailer wiring harnesses that fit the 2018 Imrpeza are part # 118744 if you have the 5 door and part # 118629 if you have the sedan.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Brake Controller Installation on a 2007 Ford Expedition with Factory 4-Way Wiring Harness
- Q&A: Comparing Trailer Wiring Harnesses for a 1996 Chevrolet Caprice Sedan
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Parts Needed to Install 7-Way Trailer Connector on 2021 Honda Odyssey
- Q&A: Can 1-1/4 to 2 inch Hitch Adapter # e93YR Work on 2010 Honda Civic
- Q&A: Recommendation for 1-1/4 Inch Ball Mount with 8 Inch Rise
- Q&A: Ball Mount Recommendation for a 2014 Subaru Forester with a Curt Hitch # C12100
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Which is Best Brand of Trailer Brake Assemblies
- Article: What Do I Need To Tow A Trailer?
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: My Trailer Hitch Doesn't Fit