Kodiak Brakes for a Tandem Axle EZ Loader Boat Trailer with 12

Question:

Hello, these will be replacement Kodiak brakes i need for my EZLoader boat trailer. I have disk brakes all the way around. I measured my rotors and they are 12 inches across with a 6 bolt pattern. I believe I have decided I need two sets of your K2HR526D?

asked by: Randall K

Expert Reply:

For a tandem axle EZ Loader boat trailer with 12" rotors and a 6 bolt pattern, the Kodiak Disc Brake Kit # K2HR526D does look to be what you are needing. There are a few things you can check though to verify that they will fit properly.

You will want to make sure that your Inner Bearing is part # 25580, your Outer Bearing is part # 15123, and that your Grease seal is part # RG06-070 or that it has a 2.250" Inner Diameter. You will also want to check to make sure you have a 6 on 5-1/2" bolt pattern for your wheels. You can verify this by measuring from the middle of one bolt to the middle of the bolt directly accross from it and that should measure 5-1/2".

Although the bearings, seal, and bolt hole pattern are common for disc rotors that are 12" in diameter, it is always a good practice to take a few extra steps to make sure they are an exact fit.

expert reply by: Jon G