How to Pick Axle Location for Tandem Axle Trailer
Question:
I have strip and old caravan and making it into food van but weight is an issue for single axle. just needing to know how to correctly fit double axle with the right dimensions. from tongue to back measurements are 6250 body of trailer 4780 axle to front box 2700 axle length is 2147 what distance should I place two axles Thank you
asked by: Raquel O
Expert Reply:
To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger.
The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 18 feet, then the center-line location for the equalizer hanger will be 10.8 feet from the front of the trailer and 7.2 feet from the back.
This is where to start with when picking out axle locations for a tandem axle trailer. You will need to determine the tongue weight of the trailer and then check out the picture I attached if the tongue weight is anything other than 10 percent of the total trailer weight.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 5000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Q&A: Suspension Parts Needed for 3,500 lb Tandem Axles and 29-1/2" Hanger Spacing
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Search Results: 166081
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Search Results: k23~027~00
- Search Results: k23~026~00
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - AP233 Review
- Article: Double-Eye Trailer Suspension System Review
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: Where to Position the Trailer Axle?
- Q&A: What Is The Difference Between Different Sized Hangers, Equalizers, And Shackle Straps
- Search Results: 4 leaf double eye
- Q&A: 3,500 lb Axle And Leaf Spring Setup - What Parts Do I Need?
- Q&A: Correct Hanger Spacing For The APT4 Kit Using 25-1/8 Long Leaf Springs
- Q&A: Can Heavier Leaf Springs Be Used On Tandem-Axle Boat Trailer
- Q&A: Hanger Spread For Tandem Axle Trailer With 26-1/2" Leaf Springs and 7-3/4" Equalizer
- Q&A: Determining If Trailer Suspension Is Correct Since It Has 28-3/4" Hanger Spacing Instead Of 29-1/2"
- Search Results: trailer suspension kit
- Search Results: sp~219275
- Search Results: h248
- Shop: Grille