Sway Control Recommendation for Towing a 2004 K-Z Frontier 28 Foot Travel Trailer
Question:
I am going to purchase the Reese dual cam sway control unit from etrailer but see the spring bars are not included. How do I know which spring bars to buy? And how do I figure that out? I have a 2004 K-Z Frontier 28 foot lightweight travel trailer.
asked by: Gary
Expert Reply:
If you just want sway control and do not want to add weight distribution, you will need to use friction sway control like # 83660. You will also need a bracket for the end that attaches to the vehicle hitch. use # RP26003 for a 2 inch ball mount, or # RP26005 for a 1-1/4 inch ball mount.
If you want a weight distribution system with dual-cam sway control, I recommend Strait-Line Weight Distribution System, # RP66087. I have included a link to the installation instructions for this system for you. This system comes with everything you will need except a properly sized ball. You can use # 19256 (2-5/16 inch diameter) or # A-90 (2 inch diameter).
I have also incldued a link to our weight distribution and sway control FAQ article.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Reese Sway-Control Bracket for 1-1/4" Drawbars - Class II
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop
- Article: Steel vs. Aluminum Ball Mounts
- Q&A: Can Sway Control be Used on a Trailer without Using Weight Distribution
- Q&A: Should 1 or 2 Bar-Style Friction Sway Control Units be Used on a 7,000 Pound Trailer
- Q&A: Recommended Weight Distribution System for a 3,500 lbs Trailer
- Q&A: Availability Of TLC65 Trimax Trailer Wheel Chock and Lock With A23456 Keys
- Article: Determining Trailer Tongue Weight
- Q&A: What Towing Mirror Extensions Will Fit My 2022 Toyota Tundra Limited?
- Q&A: Setting Up the RP26660 Reese Friction Control System
- Article: How to Choose the Right Trailer Hitch Class
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Parts Needed to Add Brake Controller to 2024 Toyota Sienna Platinum