Availability of Trailer Hub That is 4 Inches Long, Has 1-1/16 Inch Bearings, 4 on 4 Bolt Pattern
Question:
I am looking for a replacement hub assembly where the hub is 4 inches long, 1 1/16 bearing, 4 on 4 bolt pattern. I have two axlestwo trailers, that take 1 1/16 bearings but one hub is 3 1/2 long and the other that I want to replace is 4 inches. thanks.
asked by: Ron
Expert Reply:
The best way to determine the correct replacement hub assemblies for your trailer is to retrieve the bearing numbers stamped into the metal of both the inner and outer bearings. With those numbers, we can find which hubs would be a correct fit. I am including a link to a video that will show you how to remove, inspect, and reinstall trailer bearings, races, and seals.
I have the Dexter Trailer Hub Assembly, part # 8-91-05UC1 which has a 4 on 4 bolt pattern. It uses the TruRyde Bearing, part # L44649 as an inner and outer bearing. This bearing has an inner diameter of 1.063 inches. 1-1/16 inches will translate to 1.062 inches. This hub is designed for Dexter 2,000-lb axles.
I went out to the warehouse and measured the hub journal length of the hub, which is the measurement from the back edge of the center hub casting to the front edge of the center hub casting and it measures 4-1/4 inches long.
I would also recommend to make sure and use the same size hubs on the same axle.
![Jeff D](https://images.etrailer.com/static/images/catg/people/338_tn.jpg)
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Correct Hub Assembly for Dexter 8-258 Hub and 13-Inch Wheels
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Q&A: Replacement Trailer Hub Recommendation for Dexter 8-258
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs