Available 3,500 lb Timbren Axle-Less System Without Electric Brakes
Question:
do you sell this item bellow without trailer brakes? Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - 4inch Spindle - 3,500 lbs Item # A35RD545E
asked by: RYAN
Expert Reply:
There is a Timbren Axle-Less Trailer Suspension System similar to # A35RD545E but does not have electric brakes. The # A35RD545 has the same 3,500 lb capacity with a 4" drop spindle and idler hubs. The hubs have a 5 on 4-1/2" bolt pattern with inner bearing # L68149, outer bearing # L44649 and grease seal # RG06-050. I've added a link to a video review of the Timbren Suspension System for you to take a look at as well.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - 4" Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: 2013 Ford F250 Showing Trailer Wiring Fault Without Trailer Plugged In
- Q&A: Separating Turn and Brake Lights on a Trailer
- Q&A: Installation Instructions For Hopkins Engager Trailer BreakAway Kit
- Q&A: How To Wire Up Hopkins Engager Push-To-Test Trailer Breakaway Kit
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Parts Needed To Convert Oil Bath Hubs On EZ Loader Boat Trailer To Grease
- Q&A: 3,500 lb Timbren Axle-Less Suspension System With Drop For Small Camper
- Q&A: Do Electric Brakes Need to Share Ground Wire?
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)