Weight Capacity for Bike Frame Adapter Bar SA3040

Question

Question:

What is the weight cap. for the #SA3040 ADAPTOR BAR? THANKS,

asked by: Jon

0

Expert Reply:

The weight capacity for the # SA3040 is 35 lbs which is the standard weight capacity for these adapter bars. It's also the same capacity as nearly all hanging bike racks as well.

If you needed a higher weight capacity you'd need a platform style bike rack like the # SA4025F which has a capacity of 60 lb per bike.

expert reply by: Jameson C

0

Answer 1

In order to use a women's bikes on the Saris Trunk Mount Bike Rack you'll need an adapter which is what allows the bikes to be carrier level since there is no horizontal cross tube to attach to. The Saris Bike Beam Bike Frame Adapter Bar part…

view full answer...

Answer 2

If you're using the Saris Bike Beam Bike Frame Adapter Bar part #SA3040 on a Lectric XP 2.0 E-Bike with a platform style rack then there will be no issues but if you're using it on a hanging style rack then you will be way over capacity. The…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 5

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 6

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...

Answer 7

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Answer 11

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Answer 12

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Weight Capacity for Bike Frame Adapter Bar SA3040

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching