Availability of 4 on 4 inch Bolt Pattern Hubs for a Spindle with 1 inch Inner and outer Bearings
Question:
I have 4X4 hubs with 1 Inch Inside bearing Dia. Would you have them?
asked by: Dave
Expert Reply:
Yes, we have the Trailer Hub Assembly for 2,000 lbs Axles with 4 on 4 inch bolt pattern, and 1 inch inside diameter bearings, item # AKIHUB-440-2-1K. You should check the existing bearing part numbers on your trailer to be sure that they are the # L44643 inner and outer bearings. Your seal part number should be # 34823, with an inner seal dimension of 1.249 inches.
The hub you referenced has 1-1/16 inch inside diameter bearings, and would not work on a 1 inch spindle. The bearings for the 1-1/16 inch spindle are # L44649 and seal is a 10-9 with Inner seal dimension of 1-1/2 inches.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Trailer Fender Recommendation to Replace a 10 X 33 X 17 Fender
- Q&A: Trailer Hitch and Wiring Harness Recommendation for 2006 Mercedes-Benz ML350
- Q&A: Troubleshooting Bulging Center Plug of Trailer Hub
- Q&A: Troubleshooting Barker VIP 3500 Electric A-Frame Trailer Tongue Jack
- Q&A: Recommended Weight Distribution System For 2005 Nissan Pathfinder Towing Travel Trailer W/ 5250 GVWR
- Q&A: Replacement Hub Needed for Dexter Axle 8-256
- Q&A: Recommended Hoist with Winch to Install 5th Wheel Hitch in Truck Bed
- Shop: Trunk Bike Rack
- Shop: Tool Box
- Shop: Base Plate for Tow Bar
- Shop: Mud Flaps
- Shop: Vehicle Air Mattress
- Shop: Tailgate
- Shop: Truck Bed Sliding Tray
- Shop: SuperSprings Custom Suspension Stabilizer and Sway Control Kit
- Shop: Buyers Products Toggle Switch with 2 Blade Terminals - Recessed Panel Mount - 12 Volt
- Shop: Bulldog Winch Receiver Mount Kit - 2" x 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Replacement Cross Chain for Titan Chain Ladder Pattern Tire Chains - V Bar Links - 15-1/8" Long
- Shop: Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
- Shop: RV Rectangular Porch and Utility Light with Switch - Clear