Weight Distribution and Sway Control Recommendation for a Mobile Scout 30ft Travel Trailer
Question:
I have a mobile scout 30ft trailer. TW of 1200lbs and GVWR of 11,700 lbs. Will this hitch work with this trailer? I will pull it with a 2011 GMC 2500 Diesel. Strait-Line Weight Distribution w Sway Control - Trunnion Bar - 17,000 lbs GTW, 1,700 lbs TW Code: RP66075. Dual cam system.
asked by: Robert G
Expert Reply:
I checked some photos online to get a look at the frame on your Mobile Scout 30ft Travel Trailer and, with the weights you listed, the Strait-Line weight distribution system, item # RP66075, would be a good choice for this trailer, if your 2011 GMC 2500 Diesel has a 2-1/2 inch receiver hitch.
If your truck has a 2 inch receiver hitch, the highest rated system we have is the Strait-Line system # RP66130, which is capable of 1500lbs tongue weight and 15000lbs gross trailer weight.
You will also need to make sure that there is room on the trailer frame at 29 inches from the center of the coupler for attachment of the snap up brackets.
If there is not room because of a trailer mounted battery or propane tanks, you will need to use bolt on chain hangers, item # RP58305, to attach the chains to the frame of your trailer. Attaching chains to the bolt on hangers is accomplished by hooking the trailer to the vehicle and using the trailer jack to lift the trailer and vehicle until the proper link in the spring bar chains can be placed on the hanger. Once the chain is attached, the weight is then lowered and the spring bars will distribute the weight. You will need to make sure you do not exceed 1400 lbs tongue weight or 14000 pounds gross trailer weight with this style of hanger.
With either Strait-Line weight distribution system you will also need a weight distribution shank, and a properly sized hitch ball. If your truck has the 2-1/2 inch hitch, the Reese Titan shank, item # RP54977, will be the correct shank and if you have a 2 inch hitch item # RP54970 will be the correct shank. For either system the Curt Trailer Hitch Ball, item # 63840, would be a good choice.
I have linked an installation video and instructions that should be helpful in making your decision.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 20000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 1600 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: Recommended Water Heater Replacement For Atwood GC10A-2
- Q&A: Water Heater Replacement for Atwood GC10A-2
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: Installation and Torque of 1-1/4 Inch Shank Hitch Ball onto Ball Mount
- Q&A: Troubleshooting Nuts for U-Bolts on 17K Reese Strait-Line Twisting Off
- Q&A: Replacement Glass Stove Top for a Furrion F1S17L02A-BL Stove
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: What is Boondocking
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight