Replacement 1/2"-20 Wheel Stud for a Load Rite Boat Trailer
Question:
I have a broken wheel stud on a load rite double axle boat trailer. The threads are 1/2-20, splines are 5/8 wide and 22 per inch, spline length is 5/8, the base length is 11/16, I dont have the thread length since this one is broken. Can you recommend a replacement?
asked by: Joel S
Expert Reply:
In order to replace the broken wheel stud on your Load Rite boat trailer, I recommend using the Trailer Hub Wheel Stud part # 7-122 for a 2" long stud or the Trailer Hub Wheel Stud part # 7-150 for a 2-3/32" long stud. You can measure your remaining studs to determine the correct length. The dimension for each of these replacement wheel studs can be found on the product page.
If you also need a new lug nut then you will want to use the CE Smith Trailer Wheel Lug Nut part # CE11051 for conned shaped or the Chrome Trailer Wheel Lug Nut part # 12CLN for acorn shaped.
Products Referenced in This Question
Chrome Trailer Wheel Lug Nut - 1/2" (Each)
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 1/2 Inch Wheel Bolt
- Hex Nut
- 3/4 Inch Outer Diameter
- 60-Degree Cone
- Chrome-Plated Steel
- Redline
more information >
Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-3/32 Inch Long
- Redline
more information >
CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 1/2 Inch Wheel Bolt
- Hex Nut
- 13/16 Inch Outer Diameter
- 60-Degree Cone
- Zinc-Plated Steel
- CE Smith
more information >
Product Page this Question was Asked From
Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Redline
more information >
Continue Researching
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Q&A: Wheel Studs for a Load Rite Boat Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Loadstar ST205/75D14 Bias Trailer Tire with 14" Black Wheel - 5 on 4-1/2 - Load Range C
- Shop: Bearing Buddy Bearing Protectors - Model 1968SS - Stainless Steel (Pair)
- Shop: Trailer Spindle Nut 1"
- Shop: Loadstar ST215/75D14 Bias Trailer Tire with 14" White Wheel - 5 on 4-1/2 - Load Range C
- Video: Redline Tires and Wheels 7-122 Review
- Search Results: 7~262
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 1-11/16" Long
- Search Results: trailer wheel studs
- Search Results: 1/2 wheel stud
- Search Results: 1/2 20 lug nuts
- Video: Kodiak Tires and Wheels K12WB169 Review
- Video: Review of Redline Replacement Trailer Hub Wheel Stud - 165981
- Search Results: wheel studs
- Search Results: hitch locks
- Search Results: 15" trailer rim
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Can Wheel Studs on Brake Hub/Drum Be Replaced
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258BTUC1 Review
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Wheel Stud that is 1/2 inch Diameter, 2 inch Length and .63 Spline Diameter
- Video: Wheel Stud Installation on a Boat Trailer
- Video: Kodiak Tires and Wheels K12WB2 Review
- Q&A: Replacement Wheel Stud for Lippert 3,500 lb Axle
- Article: How to Bleed Your Trailer Surge Brakes