2004 Ranger Trailer Hub Recommendation
Question:
Need hub assembly ASAP for 2004 Ranger trail tandom axle.
asked by: Justin Y
Expert Reply:
From past experiences with your trailer we do know a bit about what hubs are typically going to fit but I would recommend you verify first by checking your trailer. We have found that your trailer has inner bearing L68149, ID 1.378, race OD 2.0362, outer bearing L44649 ID 1.063, and race OD 1.980.
I recommend the Dexter Trailer Hub Assembly # 8-247-50UC3-EZ. This hub features a grease cap that is compatible with EZ lube spindles that have a grease fitting out the end of the spindle. The galvanized hub is ideal for marine use, and will be durable enough for both freshwater and marine environments. This assembly comes with bearings, races, and a grease seal.
I attached a picture that shows where to check your current spindles/bearings to verify.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Replacement Trailer Hub Bearing - L68149
- Q&A: Ranger Trailer Cool Hub Replacement Grease Seal AD2527E
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Q&A: What is the Overall Width and Diameter of a 235/80R16 Size Tire
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Q&A: Replacement 10-Inch Galvanized Drum Brakes for Boat Trailer with 14-Inch Wheels
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Pros And Cons For Switching From Electric To Electric Over hydraulic Disc Brakes On Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Which Brakes to Fit in Dexter 8-247 Hub and Drums
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Install E-Track in 3 Easy Steps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub