What is the Pin Hole to Ball Hole Length of Draw-Tite Ball Mount 40343
Question:
Hi: Your information says the Draw Tite Ball Mount 40343 measures 10-1/2inch from pin hole to ball hole. I have what is labeled as a 40343 on my Tacoma, but I get a measurement of just 8-1/2inch from pin hole to ball hole. I want to get a longer one, but I dont want to order the 40343 if its the same one I already have. Can you help? Thanks.
asked by: Michael M
Helpful Expert Reply:
Ball mount # 40343 was measured when the video for it was made (which was recently). As you can see in the picture I have included we found that the distance from the center of the pin hole to the center of the ball hole is 10-1/2 inches.
If you want something even longer we have # BM20 which measures 13-1/4 inches from the center of the pin hole to the center of the ball hole! I have linked a video review of this ball mount as well.
Products Referenced in This Question
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Brophy
more information >
Product Page this Question was Asked From
Draw-Tite Ball Mount - 3/4" Rise, 2" Drop - 10-1/2" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Draw-Tite
more information >
Continue Researching
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Longer Ball Mount Recommendation With at Least 750 lb Tongue Weight Capacity
- Q&A: Is Towing With A Hitch Better Than Towing With A Ball Mounted To Bumper
- Q&A: Adapter to Convert 6-Pin Flat Trailer Connector to 7-Way
- Q&A: Dimensions for Draw-Tite Max-Frame Trailer Hitch # 75528
- Q&A: Storage Cover for 10 foot 1964 Compact Shasta Camper
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: What Is Flat Towing and How to Ditch the Trailer