Can I Use the Hitch from a 1998 Dodge Ram Pickup on a 2000 Dodge Ram 1500 Van?
Question:
Can I remove the hitch from a 1998 ram pickup and mount it to a 2000ram 1500 van?
asked by: David C
Expert Reply:
The good news is that we do have some hitches that are compatible with your 2000 Dodge Van. The bad news is that you cannot use hitch # C15300 from a 1998 Dodge Ram Pickup on a 2000 Dodge Van because the hitches are not interchangeable. The mounting holes are in different locations and hitches are custom designed to fit the frame of specific vehicles. The frames of these 2 vehicles vary quite a bit.
I recommend the Draw-Tite Class III Hitch, # 75140. This hitch will work with either a Factory Step Bumper or the Standard Bumper. It is a simple bolt-on installation with no drilling or welding required. We also offer a custom Curt Wiring Harness for your van, # C55368. I also recommend Ball Mount Kit, # 989900 to complete your towing setup.
If you have any additional questions, don't hesitate to ask. I'd be happy to help.
Products Referenced in This Question
Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2400 lbs TW
- 16000 lbs GTW
- 17000 lbs WD GTW
- 2 Inch Hitch
- 2400 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Bolt Hole Spacing for Draw-Tite Class V Trailer Hitch Receiver DT45502
- Q&A: Distance Between Mounting Holes Left to Right of Curt Hitch # C15300
- Q&A: Bolt Hole Location on Curt Class V Trailer Hitch Receiver # C15300 for 1993 Ford F-150
- Q&A: Will Curt # C15300 Clear Flatbed on 1997 Ford F350
- Q&A: Distance Between Vertical Mounting Flanges of Curt Hitch C15300
- Q&A: Is There An Aftermarket Puck System Available For A 1995 Ford F-350
- Q&A: Distance Between Mounting Holes On B&W Heavy-Duty Trailer Hitch Receiver For 1996 Ford F-150
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy