Recommended psi Rating for the Kenda Tire and Wheel # AM30660
Question:
Since this tire is rated at 90 psi, should I put that much pressure in the tire if my trailer load is not heavy or should I put less pressure 80 to 85 psi? Is it always best to be at the top psi rating?
asked by: Don H
Expert Reply:
For any trailer tire, including the Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel # AM30660, you will always want to have it inflated to the recommended cold tire pressure. Since the cold tire pressure for this tire is 90 psi you will want to keep it at that level.
This will ensure that your tire can carry up to 990 lbs and has the speed rating of 65 mph that the manufacturer tested for. Any more or less psi will mean that the tire is not performing the way that the manufacturer meant for it to perform and load capacities and speed ratings are unknown.
Product Page this Question was Asked From
Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Max Highway Speed Rating for 4.80-12 Tires
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Increasing Wheel/Tire Size on Carry-On Utility Trailer
- Q&A: Smaller Trailer Tire Than 215/75R14 w/ 5 on 4-1/2" Bolt Pattern To FIt in Garage
- Q&A: What Size Wheels And Tires Will Fit On a Carry On 5 X 7 Trailer With Axle Flipped?
- Q&A: What is the Difference Between Load Range B and C Trailer Tires of the Same Size
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Tires for Highway Travel on 5x8 Utility Trailer With 4.80-12 Tires
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure for Trailer Hitch Drop
- Article: The #1 RV Roof Maintenance Tip: Keep it Clean (Here's How)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)