3,500 lb Spindle Recommendation for Boat Trailer
Question:
Bass pro said it was no longer available. Axle has a bend that conforms to the boat if not able to replaced is there a way to replace welded spindle.
asked by: Mike G
Expert Reply:
We do not have the axle you are looking for, but we do have 3,500 lb spindles that may be just what you need.
The part # TRU74FR is an EZ lube spindle with a 3,500 lb capacity. This would fit standard 3,500 lb hubs as well.
Trailer spindles should only be installed by a qualified fabricator with trailer axle experience who has the necessary equipment to square up a trailer spindle. It's not a project for someone who's pretty good at welding since if the spindle is off by just a little bit you will have all sorts of alignment issues.
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Replacement # 84 Spindle Recommendation to Replace a Trailer Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacing Spindle of Dexter 3,500 lb Axle Due to Wear
- Q&A: Replacement Hub and Rotor Assembly for 2023 Shoreland'r Boat Trailer with 3,000 lb Weight Rating
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer