Will Lippert Landing Gear # LC179013 and # LC179014 Fit a 2008 Wildcat 5th Wheel Trailer
Question:
Will the Lippert Components 32 inch LC179013 and LC179014 Legs fit my 2008 Wildcat 5th Wheel?
asked by: Bill B
Expert Reply:
The Lippert Components Lead Leg # LC179013 and Follow Leg # LC179014 both have the standard weld stop measurements that are 15-1/2" from inside to inside and 17-1/2" from the outside to outside (see attached picture). Since this is a standard weld stop measurement these will likely be exact replacements for you, but you will simply want to look at the weld stops on your current landing gear to see if it is the same.
You will also want to verify the weight capacity of your current landing gear to ensure that these replacement options are compatible with your 2008 Wildcat 5th Wheel Trailer. These landing gear legs have a 4,000-lb capacity per leg when the manual crank or a dual motor is used. When a single motor is used that weight capacity is reduced to 2,000 lbs.
![Jon G](https://images.etrailer.com/static/images/catg/people/1086_tn.jpg)
Products Referenced in This Question
Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for RVs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
more information >
Product Page this Question was Asked From
Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Lippert
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Find the Correct Replacement Lead Leg for 5th Wheel Landing Gear
- Q&A: Replacing ADTH 1RV-200 Landing Gear Motor
- Q&A: Replacement Landing Gear Legs for Set with Number VMC900R
- Q&A: Recommended 5th Wheel Hitch Compatible with CMI 5th Wheel Rails
- Q&A: Replacement gears for Lippert Landing Gear Instructions and Diagram
- Q&A: Recommended Dual-Motor Landing Gear To Replace Single Motor Landing Gear On Arctic Fox Fifth Wheel
- Q&A: Replacement Step Pad For 3 Inch Nerf Bars With 20 Inch By 3 Inch Pad
- Article: Trailer Lighting Requirements
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: RV Cell Boosters, How Do They Work?
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Most Popular Wheel Bearings
- Article: How Much Solar Power Do I Need For My RV?