Replacement 600 Pound Reese Weight Distribution Trunnion Spring Bar with Cam End
Question:
Hello. Recently while camping in a parking lot enroute home, someone stole one of my trunion spring bars. It does not look unlike RP2327, saying V5 rating, 600 jjWt Distributing Spring Bar, 10,000 max gross trailer weight, 600 Max Hitch Weight, 2 bars. Is this a replacement for this bar? My system is fairly old, and the thickness of this bar is 2 1/8 inches. Id need the trunion and the spring bar, and the accessory kit for it. Is this what I need to order? The measurements of my one remaining bar are as follows: Looking down from the top, measured straight from the center of the pivotinch that goes into the head to the tip NOT down the bar, just straight out, is 32 inches. Measured from underneath in the same way is about 31 inches. Ive attached a picture.
asked by: Nathan J
Helpful Expert Reply:
Based on your measurements Replacement Trunnion Spring Bar for Reese Weight Distribution System - 600 lbs TW Item # RP23227 is indeed the correct replacement spring bar for your system.
For the chain, u-bolt, nuts, and washers to attach the spring bar to the lift bracket you will need # 55630. And if you need the lift bracket too it is # RP21501.
Products Referenced in This Question
Reese Replacement Chain Kit for Uplift Bracket for Weight Distribution
- Accessories and Parts
- Weight Distribution Hitch
- Chains
- Reese
more information >
Replacement Lift Bracket for Reese Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Frame Bracket
- Reese
more information >
Continue Researching
- Shop: Replacement Lift Bracket for Curt Weight Distribution Systems
- Shop: Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW