Replacement Cover for Norcold EG Refrigerator Vent

Question

Question:

Does your CAM42160 vent cover replace the cover for: Exhaust Air Kit No. 615791 Norcold EG Models ? Thanks

asked by: Rawley W

1

Helpful Expert Reply:

The Camco RV Refrigerator Vent Cover # CAM42160 referenced in your question is compatible with a lot of the newer Norcold bases, but you can take a couple measurements on your existing base to confirm if this will fit. This cover is designed to fit a base that measures 26 inches long and 7-1/2 inches wide. The cover itself is 33-1/4 inches long, 10-1/4 inches wide and 3-5/8 inches tall.

If these measurements match what you currently have, then this cover will work great as a replacement. I have also included a short video demonstration on this product that you can check out.

expert reply by: Chris R

1

Answer 1

The LR Jack error code is identifying that there is an electrical issue with the left rear jack of your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC358590. You will need to check the fuse on the main controller for damage as…

view full answer...

Answer 2

Only one photo came through, but Dometic bought out that portion of Atwood. We have the Replacement Lid for Dometic Refrigerator Vents - Polar White #VM65528 which may fit your Atwood fridge. The overall dimensions are 27 inches by 10-3/4 inches…

view full answer...

Answer 3

The Camco RV Refrigerator Vent Cover #CAM42160 is designed for Norcold refrigerator bases but I went out to our warehouse to take some measurements on the mounting holes for the cover so you can compare it the specific N841.3 model you have. There…

view full answer...

Answer 4

When it comes to installing wall clips in your 2013 Itasca Navion Motorhome the difference between the thin or thick wall clips is how thick the walls are in your motorhome. The Refrigerator Vent Latches - Thin Wall - Qty 2 #372235 work with walls…

view full answer...

Answer 5

Thank you for your recent purchases from etrailer. A bad or insufficient ground is among the most common causes for issues with trailer lighting. The Peterson License Plate Light #PM436B that you have does use its steel mounting surface to make the…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Replacement Cover for Norcold EG Refrigerator Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching