Weight Distribution and Sway Control Recommendation for 2009 Fun Finder Trailer and 2009 Ford F-150
Question:
I have a 2009 Ford F-150 4x4 supercab with 4.6L 3 valve V-8 with 3.73 rear end. My camper is a 2009 Fun Finder GVW 5700# looking to add a weight distribution system with sway control. What would the recommended system be. We travel across country from PA to Colorado carrying 150 - 300 # of gear in the bed of the truck while pulling the camper.
asked by: Scott E
Expert Reply:
With a trailer that weighs 5,700 pounds, plus the 300 pounds of gear, we are looking at 6,000 pounds. You will want a weight distribution system that has a tongue wight capacity range that encompasses 10 to 15 percent of the gross trailer weight with it loaded and ready to tow.
That would put your Fun Finder tongue weight at 600 to 900 pounds, so I recommend going with a system rated for 600 to 1,200 pounds like Strait-Line Weight Distribution System w Sway Control, # RP66084. This system comes with the necessary adjustable shank so you would just need a properly sized ball like # 19286 (2-5/16 inch diameter) or # A-90 (2 inch diameter).
This system also comes with built-in dual-cam sway control. This is a pro-active system that stops trailer sway before it starts. I have included a link to the installation details for the weight distribution system as well as a link to our FAQ article on weight distribution and sway control.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement OneControl Advantage Controller for Lippert Level Up RV Leveling Systems
- Search Results: lc53ed
- Search Results: lippert 807615
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Power On No Picture Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor SH02Digital
- Q&A: Differences Between Friction Based Sway Control and Dual Cam System For a Trail-Bay Travel Trailer
- Q&A: Recommended Weight Distribution Hitch for 2022 Grand Design Imagine XLS 21BHE
- Q&A: Which System Is Best Between The Curt TruTrack & The Equal-i-zer Weight Distribution System?
- Q&A: Where to Mount Spring Bar Support Brackets on Curt TruTrack Weight Distribution System # C17499
- Q&A: Reese Strait-Line Weight Distribution part # RP66074 Work With 2001 Ford F-150 Towing 23ft Trailer
- Q&A: Angle of hitch ball on Reese 1200 trunion hitch