Does the Valtera Heel Inlet with 3" Elbow have a Hub or a Lug Fitting?
Question:
Hello, Is the T1031 a 3 inch Hub or Lug fitting ? The Valterra website says Hub, but the image on their site and everyone elses shows lugs, the etrailers site says lug and hub in various different places. Can you clarify what the connections are to the T1031 fitting? Thank you
asked by: Steve O
Expert Reply:
Great question! And the answer is "D: all of the above". The Valterra RV Sewer Heel Inlet with 3" Elbow, # T1031 has both a lug and a hub fitting. One end of the 3" elbow has a lug fitting which allows you to connect to the bayonet fitting on a sewer hose. The other end of the 3" elbow has a hub end with a rotating flange that will bolt onto the black water waste valve. And the 1-1/2" heel inlet is a hub with a rotating flange that bolts onto the gray-water waste valve. I've attached a photo of the different types of RV Sewer fitting connections for those who may not be familiar with the terminology.
You will need an ABS Solvent Cement like # A05-0303 to secure the hub fittings. You may also need a bayonet-style cap like # T1020CLRVP for the lug fitting when not in use.
![Amy W](https://images.etrailer.com/static/images/catg/people/433_tn.jpg)
Products Referenced in This Question
Valterra ABS Solvent Cement - 1/4 Pint
- RV Sewer Hose Fittings
- Sewer Seals and Gaskets
- ABS Cement
- Valterra
more information >
Valterra RV Waste Valve Cap - 3" - Clear
- Accessories and Parts
- RV Waste Valves
- Caps
- Valterra
more information >
Product Page this Question was Asked From
Valterra RV Sewer Heel Inlet - 90-Degree - 3" Lug x 3" and 1-1/2" Rotating Flanges
- RV Sewer Hose Fittings
- Sewer Elbows
- 90 Degree Angle
- Lug
- Sewer Hose to Waste Valve
- 1-1/2 Inch Diameter
- 3 Inch Diameter
- Rotating Flange
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Color of Light Output for the Optronics Flexible LED Light Strip # UCL90CB
- Q&A: Amperage Draw of Optronics Flexible LED Light Strip # UCL90CB
- Q&A: Fifth Wheel Rail Kit Recommendation for 2018 Ram 1500 5-1/2 ft Bed
- Q&A: Replacement 14,000 lb. Hydraulic Jack Assembly for Lippert Level Up Systems
- Q&A: Replacement for Lippert Slide Out Motor 131903
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Converter For Parallax 7355 Power Center Converter
- Q&A: Inverter Replacement for 300 Watt WIN-12/300TL
- Article: Performance Chips and Modules