Bearing Buddy and Bearing Kit Recommendation for 3,500 lb Axles
Question:
I have a 1999 MacLander 18ft trailer and I need to find a bearing kit. Two axles 3500lbs. And bearing buddies. Please could you find a kit number for me?? Thanks, Wayne
asked by: Wayne
1
Helpful Expert Reply:
For standard 3,500 lb axles the correct bearing kit is the part # BK2-100 which comes with L44649 and L68149 bearings.
Bearing Buddy Protectors # BB1980A-SS are the ones most commonly seen on 3,500 lb hubs. This is designed to fit a hub bore of 1.980 inches.
expert reply by:
Jameson C
1
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Brake Controller
- Search Results: bearing buddy
- Search Results: bulldog trailer coupler locks
- Search Results: trailer coupler locks
- Shop: TowSmart Trailer Coupler Lock - 1-7/8", 2", and 2-5/16" Couplers
- Shop: Blaylock EZ Lock Trailer Coupler Lock for 1-7/8", 2", and 2-5/16" Couplers - Aluminum
- Shop: EZ Lock Trailer Coupler Lock for 1-7/8", 2", 2-5/16" Bulldog Collar-Lok Couplers
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Master Lock Hitch Receiver and Coupler Latch Lock Set - Swivel Design - 2" Hitches
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: BOLT brand vehicle and hitch locks
- Shop: Base Plate for Tow Bar
- Shop: Off Road Lights
- Shop: Vehicle Air Mattress
- Shop: Grille Guard
- Shop: Suspension Enhancement
- Search Results: akhd~5475~35~k
- Search Results: akebrk~35~sa
- Q&A: Bearing Buddy Recommendation for Dexter Hub 8-248 3,500 lb Axle
- Search Results: axel grease
- Search Results: 63232
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-5475-35-K
- Video: etrailer Pre-Greased Trailer Hub and Drum Assembly Review and Installation
- Video: Lets Go Aero Hitch Locks - Universal Anti-Rattle Lock - 63232 Review
- Video: Review of Gen-Y Hitch Hitch Anti-Rattle - Anti-Rattle Clamp 2 Inch Hitch Receiver - GY88XR
- Video: Review of Curt Hitch Anti-Rattle - Standard Anti-Rattle - C69HR
- Video: Review of Pro Series Hitch Anti-Rattle - Standard Anti-Rattle - PS63091
- Video: Blue Ox Hitch Anti-Rattle - Standard Anti-Rattle - BX88224 Review
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite
Mark T.
6/24/2020
We have a 3500 lb dexter 5-lug drum brake axle. It is surge brakes. I am at a total loss for the axle model #. But I do know otbisba dexter and its the 5-lug and its rated at 3500# I can't get the caliper to give me a read on the id of the wheel hub (tire forces it out too far to get a reading). We lost 1 of the bearing buddies we had (must a been a bad bump) and the other is barried into a hub-o-meter. Would like, ideally, 1 bearing buddy & 1 brayden for it. But if we have to get a full pair of both I guess it is what it is.... Please advise as beat as u can. If I gota take apart the hub-o-meter mount to get u an od of the bearing buddy or id of the hub let me know please. And ty.