Length of Paneloc Spring Latch Handle

Question

Question:

What is the measurement of the latch handle from curve to end of the handle

asked by: David R

0

Expert Reply:

The pin handle of the Paneloc Heavy Duty Spring Latch # F779-204U234 is roughly 2", and the overall length of the pin is 5-7/8".

I've attached a link to a review video for you to check out as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Yes, the Dometic Portable Camping Toilet part #DOM44FR can be used at the campgrounds dump station as long as you use the Dometic RV Toilet Essentials Kit part #DOM32FR which includes a holding tank treatment to break down the waste. There is a…

view full answer...

Answer 2

You could weld the Paneloc Heavy Duty Spring Latch with Handle - 2 Hole - Zinc Plated Steel #F784-102Z into place or you can use a punch and remove the small pin that's holding the spring in place. This will allow you to slide out the pin and…

view full answer...

Answer 3

For a B&W 4 inch offset ball that will fit a B&W Turnover Ball gooseneck hitch on your 2015 GMC Sierra 2500 you will need #BWGNXA4085. I have linked a video review of this ball for you.

view full answer...

Answer 4

The Redline Junior Locking Stainless Door Latch, part #L1833 is a universal fit item with many different mounting possibilities, the mounting hardware is not included. The hardware you need would depend on what material the door is constructed of…

view full answer...

Answer 5

The overall dimensions of the Redline "Junior" Locking Steel Flush Door Latch #L1833 that you referenced can be seen on the photo I have linked for you. I pulled a piece from our warehouse and took the measurements you requested.…

view full answer...

Answer 6

I contacted our representative at Redline about the Bolt-On Stainless Steel Spring Latch, part #SL716SS. The bracket or base of the latch measures approximately 1-1/2 inches wide by 3-1/4 inches long and is 3/16 of an inch thick. The mounting holes…

view full answer...

Answer 7

Ford isn't super-clear about identifying the trailer lighting fuses in their owner's manual for your 2015 Ford F-250 Super Duty. I've shown several different fuses in the engine compartment and the passenger cabin fuse blocks…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Length of Paneloc Spring Latch Handle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching