Can a Dexter Hub and Drum Assembly Replace an AL-KO Trailer Hub and Drum Assembly
Question:
Can I replace my 12 x 2 Al-Ko hub/drum with etrailer 12 x 2 hub/drum? Are etrailer and Al-Ko brake parts interchangeable. ie Al-Ko part are hard to find.
asked by: Dave
Expert Reply:
Yes, an etrailer Hub and Drum like # AKHD-655-6-K will be interchangeable with an AL-KO hub and drum of the same size. When replacing the hubs, you need to make sure you get the proper hub for the spindle on the axle. Each trailer manufacturer uses a range of spindle sizes depending on the application.
To determine the exact replacement, you will need to pull one of the existing hub/drums, locate the bearings, and get the bearing numbers that are stamped into both the inner and outer bearings. With this information, we will be able to find the correct replacement.
Brake assemblies and assembly parts are not interchangable between the manufacturers.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Q&A: Replacement Hub/Drum and Brake Assemblies for Trailer with AL-KO 8460 Hubs
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Trailer Wiring
- Shop: Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles - 8 on 6-1/2 - Oil Bath - Before July 2009
- Shop: Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.88" Pilot - Silver
- Shop: Grease Seals 10-36 (pair)
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector and Cover Plate - 7' Long
- Q&A: Wheel Stud Replacement Recommendation for Trailer Hub # AKHD-655-6-K
- Q&A: Can Different Brand Trailer Bearings Be Used As Replacements
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased Trailer Hub And Drum Assembly - K08-201-9B
- Video: Review of Timken Trailer Bearings - Replacement 25580 Trailer Wheel Bearing - TMK44FR
- Search Results: al ko trailer brakes
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Q&A: Can 3500 lb AL KO Brake Assemblies be Replaced with Dexter Brake Assemblies
- Search Results: 8~213~5uc1
- Search Results: k08~201~98
- Video: LubriMatic Tools - Grease and Lubricants - L11390 Review
- Video: Review of ABS Fasteners 1-3/4 Castle Nut Cotter Pin - 165649
- Q&A: Replacement Bearing Kit For Dexter 6,000 lb Axle
- Search Results: 42656
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Video: Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327864
- Video: Review of etrailer by AxleTek Trailer Axles - 7,000 lbs 94 Inch Easy Grease Axle - e93GR
- Search Results: drum assembly~7000 lbs axles~8 on 6~12~nev~r~lube
- Search Results: 12x2 brake drums 7000 dexter
- Search Results: 6000 lb spindle
- Q&A: Will The etrailer.com AKEBRK-6L Brake Replace A Left Hand Dexter 23-105 Brake Assembly
- Article: Most Popular Wheel Bearings