Hanger Spacing with Triple Axle Hanger Kit AP302-H302
Question:
Wondering if you know the spacing for kit ap302-h302 when using 26-5/8inch slipper spring sp232275 in a older tri-axle Eager Beaver equipment trailer?
asked by: Michael D
Helpful Expert Reply:
I can give you a general estimate but the only way to get it just right is to mock up all the parts to determine the proper locations prior to permanently installing everything.
On a triple axle trailer with 2 inch wide slipper springs the distance from the first and second hangers would be approximately 28-1/2 inches. From the second to third hangers it would be approximately 33 inches. And from the third to fourth hangers it would be approximately 28-1/2 inches. For this set up the center to center distance from axle to axle would be approximately 33 inches. This is also assuming the use of 10-1/8 inch equalizers.
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Triple Axle
- Redline
more information >
Continue Researching
- Shop: Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Shop: Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Search Results: triple axle hanger kit
- Shop: Equalizer Bolt with Cotter Pin and Castle Nut - 7/8" Diameter
- Shop: Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Red Lens
- Shop: LED Trailer Tail Light w/ Flange - Stop, Turn, Tail - Submersible - 6 Diodes - Oval - Red Lens
- Q&A: Recommended Triple or Quad Axle Suspension for Trailer Build
- Search Results: winch mount
- Search Results: bow roller
- Search Results: rollers
- Shop: Brake Controller
- Search Results: slipper springs
- Search Results: dexter brake actuator
- Search Results: triple axle equalizer
- Video: Review of Redline Trailer Leaf Spring Suspension - Triple-Axle Trailer Hanger Kit - APTT6SE
- Q&A: Dimensions of Equalizer in Triple Axle Slipper Spring Hanger Kit AP302-H302
- Q&A: How to Determine Hanger Spacing on a Tandem Axle Trailer with 6K Axles and Slipper Spring Suspension
- Q&A: Determining Correct Replacement Leaf Spring For Tandem Axle Gooseneck Trailer W/ Mobile Home Axles
- Q&A: How To Determine The Correct Leaf Springs For A Gooseneck Trailer
- Q&A: How to Determine Correct Replacement Slipper Springs for Triple Axle Trailer With 8,000 lb Axles
- Video: Universal Group 4-Leaf Slipper Spring Installation
- Q&A: Recommended 95 Inch Trailer Axle with 78 Inch Spring Seat Locations
- Video: Redline Trailer Suspension - Leaf Spring Suspension - H302 Review
- Video: Review of Redline Trailer Leaf Spring Suspension - Standard Equalizer - AP316
- Article: Where to Position the Trailer Axle?
- Article: Slipper Spring Trailer Suspension System Review
- Video: Optronics Trailer Lights - Clearance Lights - MC52RB Review
- Video: Review of Redline Trailer Leaf Spring Suspension - Swan-Style Equalizers - AP302