Recommendation for Installing Erickson E-Track System on Aluminum Trailer
Question:
If I put an e-track system on my Aluminum 5.5x10foot trailer with 2 inch lumber running parallel to the sides, How often will I need to mount the e-track?
asked by: Steve
Helpful Expert Reply:
When installing the Erickson Horizontal E-Track # E19148 to the floor of your aluminum trailer, the amount and type of fasteners you use will depend on the particular structure of the floor. If you are able to use the wood planks for mounting the system, there will be enough floor structure for the fasteners to securely attach to. Erickson states that you should use no less than 2 fasteners per linear foot per side. For this application, going with the minimum will be sufficient.
If you will be going into the thinner metal/aluminum floor, you will want to use self tapping screws spaced much closer together.
I have attached a video demonstration on the Horizontal E-Track product for you to check out.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Video: Erickson Tie Down Straps - Trailer - EM58522 Review
- Q&A: Hardware Recommendations for Installing E-Track
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Video: etrailer Horizontal E-Track Review
- Search Results: e~track straps
- Search Results: e~track
- Search Results: trailer jack wheel
- Q&A: Where to Attach E-Track to Aluminum Bed Trailer for Max Holding Strength
- Q&A: How is the Working Load Limit Calculated on the Erickson EM58523-09162-4?
- Q&A: Can E-Track be Flush or Recess Mounted Instead of Surface Mounted
- Q&A: Can E Track be Used to Secure Car in Car Hauler Trailer
- Q&A: Can E-Track be Installed in Car Hauler for Multiple Car Widths
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Shop: Snap-Loc E-Track Self-Drilling Metal Screws - Qty 20
- Shop: Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- Shop: CargoSmart Rope Ring for E Track or X Track - 2,000 lbs
- Shop: Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black
- Q&A: Where to Put E-Track in Motorcycle Trailer
- Search Results: etrack
- Search Results: etrack
- Article: Determining Trailer Tongue Weight
- Article: How to Install E-Track in 3 Easy Steps
- Video: Erickson E-Chock Wheel Chock Manufacturer Review
- Video: Erickson E Track - E-Track - E19146 Review
- Video: Erickson E Track - E-Track Wheel Chocks - EM09162-2 Review
- Video: Review of Erickson Tie Down Straps - Roller Idle Ratchet Strap and E-Chock Set - EM58523-09162
- Video: Erickson E-Track E-Chock Wheel Chocks Review
- Search Results: e76yr