Length Measurements for EZ Lube Spindle 2.25
Question:
I see the stub length is 3 inches to the back of the brake flange. What is the total length, end to end and from brake flange to the threaded end? Thank you
asked by: Keith
Helpful Expert Reply:
I went out to the warehouse to take some measurements of trailer spindle # TRU37FR for you. The stub is actually 3-3/8 inches from the end to the brake flange. It is 3 inches from the end to where the weld is for the brake flange.
The brake flange itself is a hair under 1/4 inches thick.
The distance from the flange to the tip of the grease fitting is 7-1/2 inches. But to the end of the threaded part it is 7-1/4 inches.
The overall length from tip to tip is approximately 11-1/8 inches. (3-3/8 + 1/4 + 7-1/2.)
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Shop: Firestone Coil-Rite Air Helper Springs - Rear Axle
- Shop: Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheels - Qty 1
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 6,000 lbs
- Shop: Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheel - Qty 1
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - 12" - Left/Right Hand Assemblies - 5.5K to 7K
- Q&A: Number 42 Spindle Recommendation for Mounting Trailer Hub for Spare
- Q&A: What Material is TruRyde TRU37FR 5.2-7K Trailer Spindle Made From
- Q&A: How Can the #42 E-Z Lube Spindle Fit Both a 5.2K and 7K Axles
- Q&A: What Type Of Steel Are Trailer Spindles Made From
- Q&A: Brake Flange Pattern For #42 E-Z Lube Spindle
- Search Results: fender
- Search Results: tru37fr
- Q&A: Can 95" Axle With 80" Spring Centers Replace 93" Axle With 78" Spring Centers
- Search Results: shock mount
- Search Results: adjustable ball mount
- Video: Optronics Trailer Light Installation
- Video: Review of TruRyde Trailer Spindles - Replacement 42 EZ Lube Spindle - TRU37FR
- Search Results: adjustable trailer coupler
- Search Results: 25580
- Video: Review of etrailer Trailer Fenders - Single Axle Fender - HP46VR
- Search Results: 328~k~51
- Q&A: Dimensions of TRU37FR Replacement E-Z Lube Spindle
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
Jorge R.
6/10/2020
Does it fit with Hydraulic Brake Kit Item # AKFBBRK-7 and Trailer Hub and Drum Item # AKHD-655-6-EZ-K