Determining if Replacement Landing Gear Set Will Mount to Existing Brackets on Trailer
Question:
Im looking for a 5th wheel landing jack. I looked at your Lippert # LC333964. Also Stromberg Carlson. Im doing a retrofit and have the welded on brackets. My question is can the welded on stops on your legs be changed to match my welded on brackets?
asked by: Ben
Helpful Expert Reply:
The weld stops on the Lippert Electric Landing Gear Set # LC333964 referenced in your question are not designed to be moved, but I can give you a couple dimensions to see if they will match up to the existing brackets on your trailer. The weld stops on these legs measure 17-1/2 inches apart outside to outside. The total length on the legs is 29-1/2 inches. You can take a quick measurement on your existing brackets to see if these will mount directly to them.
For the Stromberg Carlson Electric Landing Gear Set # LG-4 that you also mentioned, the distance between the two brackets is 19-1/2 inches and the overall leg length is 33-1/2 inches.
Products Referenced in This Question
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 6001 - 7000 lbs
- Electric Jack
- Landing Gear
- 35 Inch Lift
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Product Page this Question was Asked From
Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 5001 - 6000 lbs
- Electric Jack
- Landing Gear
- 37 Inch Lift
- Weld-On
- 2 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Determining The Correct Replacement Landing Gear For A 2005 Thor Tahoe Transport 5th Wheel
- Q&A: Replacement Parts or Assembly for Landing Gear of 1998 Gulfstream Innsbrook
- Q&A: Replacement Landing Gear Legs for Venture 900 Landing Gear
- Q&A: How Much Weight Can Landing Gear Hold
- Q&A: Replacement Landing Gear Legs Needed for a 2004 Arctic Fox 29.5E 5th Wheel Trailer
- Q&A: Replacement Lead Leg for VMC900L with Stripped Thread/Nut
- Q&A: How to Measure to Pick Out Replacement Landing Gear for a Trailer
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Choose a Bike Rack for a Motor Home or RV
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Article: Trailer Wiring Diagrams
- Article: 5th Wheel to Gooseneck Adapters
- Article: Gooseneck to 5th Wheel Adapters