Bearing Sizes for Calkins Trailer Model Z-14-600 with a 4 Lug Wheel Bolt Pattern
Question:
I need a bearing kit for Calkins trailer... which one is for model: Z-14-600 4 bolt hub Thank you!
asked by: David
Expert Reply:
I spoke with the manufacturer, who informed me that they are unable to offer specific bearing numbers based on your trailer model number.
The best way to determine your bearing sizes is to measure them. To do this, you will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the spindle nut, remove the spindle nut, and then remove the hub from your trailer.
Once the hub is removed you will be able to get the part numbers from the inner and outer bearing numbers to determine the correct bearing kit for your trailer.
I have attached a photo showing where the part numbers are located and the areas that you will need to measure if your parts do not have part numbers etched on them.
If you would like to send me the bearing numbers or measurements you find, I will be happy to recommend the correct bearing kit for you. I've also attached an article on popular trailer wheel bearings for you to check out.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: calkins trailer parts
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Search Results: calkins
- Search Results: 10~60 seal
- Q&A: Replacement 8-259 Hub With 2,000 lb Capacity and 5 on 4-1/2 Bolt Pattern
- Q&A: Replacement Bearings for a Tractor Supply 5x8 Trailer with Dexter 8-258 Hubs
- Shop: Grease Seals (pair)
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Roof Rack
- Search Results: ez lube grease cap
- Search Results: adjustable trailer hitch receiver
- Q&A: How to Determine Correct Replacement Bearings for Older Calkins Boat Trailer
- Video: etrailer Stabilizer Jacks Review
- Video: etrailer Camper Jack - Stabilizer Jack - TJ01RT-HD Review
- Q&A: Difference Between Tire Sizes 4.80-12 and 5.30-12
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Replacement Hub Assembly for 1987 Calkin Boat Trailer
- Q&A: Bearing Kit for Dexter D28H Axle on Calkins Trailer
- Search Results: bk1~150
- Search Results: center cap
- Video: Review of Redline Replacement Trailer Spindle Jam Nut - 6-191
- Video: Redline Trailer Spindles RG05-100 Review
- Shop: Front Mount Hitch
- Shop: Trailer Hitch
- Video: Tow Ready Hitch Fabrication Parts - Receiver Tube - 80948 Review
- Video: Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25836B Review