Thule Roof Rack Fairing Replacement Parts

Question

Question:

Hey! I recently got a hand me down Thule wind fairing. Im not sure what model number it is but Im looking for replacement/extra pieces that separate the car from the fairing itself in the front of it. The material of the ones used on my fairing reminds me of foam, like a pool noodle. I cant seem to figure out what it is. Thanks!

asked by: Jonel B

0

Expert Reply:

For your Thule fairing, it sounds like you need the Replacement Rubber Spacer for Thule Fairings # 853-5544. You may also need the Replacement Load Bar Clip for Thule Roof Rack Fairing # 8537361 to mount it. I've attached all the Thule fairing parts to assist.

expert reply by: Jason S

0

Answer 1

Looking at your photo, it's hard to make out which clips your fairing is currently using. The newer AirScreen fairing uses the #8528583001 as a replacement while the older model used #8537361. I've put together a photo for you showing…

view full answer...

Answer 2

It looks as if you have an older fairing, and not the Thule AirScreen, so the #8528583001 would not be compatible. For the fairing you have (judging by what little I can see in the photo you provided), you'd need the #8537361 clips.

view full answer...

Answer 3

The difference between the end caps is simply that the Thule Load Bar Replacement End Caps THEC1 are the older version of replacement end caps, while the Replacement Endcaps for Thule SquareBar Roof Racks #TH1500052968 are direct replacement caps…

view full answer...

Answer 4

The Thule Airscreen Fairing part #TH22WV is the latest version of the Thule fairing for their roof racks. Mostly the change is for appearance but some of the mounting brackets were redesigned to be a bit more robust. If you have the older style and…

view full answer...

Answer 5

We do have the replacement square head bolt that fits into the part #8537361 with the #853-208909.

view full answer...

Answer 6

At the widest the Replacement Fairing for RockyMounts 14'er Cargo Basket #RKY1053 is 38", the least widest is 31", and the height is 4-3/8". I have attached a diagram to demonstrate this. Please note that this…

view full answer...

Answer 7

The Replacement Clips 1500056059 #TH22NH are only going to be compatible with the new AirScreen XT models listed below. AirScreen XT for Thule Crossbars - 32" Long #TH62WV AirScreen XT for Thule Crossbars - 38" Long #TH72WV…

view full answer...

Answer 8

We do have the correct replacement load bar clip for a Thule wind fairing, but it depends on the fairing that you have. For the older Thule fairings the correct part is the Replacement Load Bar Clip for Thule Roof Rack Fairing #8537361. If you have…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Thule Roof Rack Fairing Replacement Parts

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching