Parts Needed to Install 7-Way Trailer Connector on 2014 Lexus RX 350
Question:
Hi. I have a 2014 Lexus RX350. It does not have the factory tow package. I installed a CURT receiver on it and need to install lighting wiring. I would like to buy this item: Item #119250KIT After installing that what more do I need to get a trailer bed with a trailer bed with a standard lighting connector to connect to whatever this kit provides? Do I need to buy another special connector that connects to this kit and provides a receptacle to connect a trailer beds lighting to? Thanks
asked by: Raj
Helpful Expert Reply:
Sounds like your end goal is to install a 7-way on your 2014 Lexus RX 350. You are on the right track. The first thing you need is a 4-way like the part # 119250KIT which is confirmed as a fit.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.
If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: 2023 Volvo XC60 Hidden Hitch and Trailer Wiring Recommendations
- Q&A: Should Tekonsha P3 be Recalibrated with Trailer Fully Loaded
- Q&A: Converting a Semi 7-Way Trailer Connector to an RV 7-Way Trailer Connector
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: Troubleshooting Trailer Running Lights Staying On when Vehicle is Turned Off
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Recommended Hitch for a 2024 Honda Pilot