Ways to Raise Trailer Deck Height of 2000-lb-Rated Carry On Trailer
Question:
do you have an over/under conversion kit for a 1 3/4inch axle its on a 2010 Carry On 2000lb trailer P# ?
asked by: Dan
Expert Reply:
We have two axle over-under kits that allow raising a trailer's height by reversing the positions of the leaf spring stack and axle. Kit # K71-384-00 works for a 2-3/8-inch diameter axle and kit # K71-385-00 works with 3-inch diameter axles. Unfortunately we do not have a kit for a 1-3/4-inch diameter axle.
If you're looking to increase deck height with your Carry On trailer that has a 2K axle you have another option.
Timbren offers axle-less suspension kits that completely eliminate the need for an axle beam under the trailer. Kit # ASR2KHDS04 is rated for 2000-lbs and it has 4-inches of lift in its spindles. This axle-less suspension will lift the trailer deck height 4-inches and also provide better ground clearance since there is no longer a leaf spring suspension under the trailer. With this kit you can use either idler hub kit # 84545UC1-EZ (no brake drums or brake assemblies) or hub/drum kit # AKHD-545-35-EZ-K (if you want drums so you can add electric drum brakes).
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Double Eye Leaf Springs For Tandem Axle Trailer With 10,500LB Rating and 24" Length on Spring
- Q&A: Does MORryde ALLTREK 4000 Cushioned Equalizer Sit Taller to Offset for Additiona Suspension Movement
- Q&A: Recommended Lift Kit for 2021 Forest River Gray Wolf Travel Trailer
- Article: Trailer Wiring Diagrams
- Q&A: What Leaf Spring Width SHould be Used with Dexter Over Under Kit # K71-384-00
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current
- Q&A: Leaf Springs and Over Under Kit that Fits 2009 Jayco Eagle Super Lite 29.5 RKS