What is the Measurement of Fulton Marine Jack from the Floor to the Bottom of the Bracket?
Question:
Could you tell me the distance between the ground and bottom of the mounting bracket when fully retracted. In the picture I attached it is roughly 11 inch for my current broken jack.
asked by: Jeremy
Expert Reply:
I think you are on the right track. The Fulton Bolt-Thru Swivel Marine Jack you mentioned, part # F1411300301, is rated at 1500 lb. With the jack fully retracted, the distance from the bottom of the mounting bracket to the floor is 12.5". I think that part # FXP15W is the one you are looking for. It measures 11" from the floor to the bottom of the mounting bracket.
On our website, we provide the bracket height for most jacks by measuring from the floor to the center of the bracket instead of the bottom of the bracket. So, you may want to measure your jack similarly and compare that measurement to the FXP15W also. From floor to center of bracket should be 12.75" retracted and 22.75" extended.
Products Referenced in This Question
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Product Page this Question was Asked From
Fulton Boat Trailer Jack w/ Wheel - Weld On - Sidewind - Swivel - 10" Lift - 1.5K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Best Speed Rating for a 4.80-12 Trailer Tire
- Q&A: Black Slide Topper For 188 Inch, 159 Inch, and 74 Inch Flange to Flange Measurements
- Q&A: Upgrading Toyota Tacoma from 4-way Flat to 7-way Round Trailer Connector
- Q&A: How to Determine if Wheels Can Withstand 110 psi Rating for New Tires
- Q&A: What Do Old Warner Trailer Brake Assemblies Look Like
- Q&A: Replacement Trailer Brake Assembly for B12EA-22 on 2018 Forest River 294BH Travel Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight
- Q&A: Wet Shackle Bolts to Reduce Noise from Tandem Axle Travel Trailer Suspension
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: How to Raise Your Travel Trailer Height