Is it Normal to Have Noise from Trailer Weight Distribution/Sway Control System
Question:
My sway makes a bad noise when I make a turn..Is it too tight or what ? Thanks.
asked by: Jim
Expert Reply:
Trailer weight distribution/sway control systems like Curt # C17062, which uses the friction bar type anti-sway, and even the integrated anti-sway systems built into other weight distribution systems like the Equal-I-zer # EQ37120ET will generate some noise. Since they use friction to control/prevent sway some noise is inevitable, even when everything is set up correctly.
Depending on the particular system and driving conditions this noise can be enough for you to hear it in the vehicle. Noise in and of itself is not a concern so long as you are finding that the system is still doing what it is supposed to do - reduce or prevent trailer sway from passing trucks and wind gusts.
Products Referenced in This Question
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Does Not Allow Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Availability Of TLC65 Trimax Trailer Wheel Chock and Lock With A23456 Keys
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Keep LED Turn Signal Lights on Toolbox From Flashing with Brake Pedal Pressed
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Weight Distribution System Compatible With Lifted Truck
- Q&A: Installing Trailer Brake Controller on 2018 Ford Transit T250 with Factory 7-Way
- Q&A: Recommended Weight Distribution Hitch System For a 7X14 Enclosed Trailer 7,000LBS GVWR
- Q&A: Are Husky Products Made In The United States?
- Q&A: Shank Size of Curt Weight Distribution Hitch