Where Do Frame Brackets of Curt TruTrack Weight Distribution Systems Mount
Question:
Is there a minimum and maximum distance to mount the clamps on the trailer tongue for the Curt trutrack #c17501? Just curious if it will fit my trailer due to the mounting of the propane tanks. Thanks.
asked by: Charles
0
Expert Reply:
I spoke with my contact at Curt and he informed me that the frame brackets of the TruTrack part # C17501 can be installed on the frame between 28-1/2 inches and 31-1/2 inches from the center of the ball hole so there is a bit of wiggle room for them to fit your trailer.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Recommended Tongue Weight Capacity for a 2020 Chevrolet Silverado 2500
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can Blue Ox SwayPro Weight Distribution be Used With Equal-i-zer Weight Distribution Shank
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?
- Q&A: Weight Distribution System For Hauling a Dump Trailer
- Q&A: Is there a Longer Weight Distribution Shank for a B&W Continuum?
- Q&A: Weight Distribution System Compatible With Lifted Truck