Curt Trailer Hitch, part # C11298 Recommendation for a 2002 Saturn L-Series
Question:
I have a 2002 Saturn LS1, is there a trailer hitch that I can use to hook up a light uhaul trailer to? And also, will drilling be required? Aslo, what other parts do I need for installation and hooking up the hitch to the trailer.
asked by: Eugene V
Expert Reply:
Yes, this Curt Trailer Hitch, part # C11298, would be the right hitch to use on your 2002 Saturn L Series. You will need to drill two holes in order to install this hitch onto your vehicle. I attached installation instructions for you to check out also.
As long as the trailer you planned on towing had a tongue capacity that was lower than 200 lbs and had an overall trailer weight that was less than 2,000 lbs this hitch would work.
You should still check the owner's manual of your Saturn to determine what they recommend as towing capacities for your vehicle. When determining what the overall towing capacity of your setup is you should always go with lowest rated component in your towing setup as your overall towing capacity.
This hitch includes all of the necessary hardware to install this product, you will only need to supply the following tools:
3/4 inch wrench
Drill
1/2 inch drill bit
Sealant part # 0160297
You may be interested in the following products to complete your towing setup:
Draw-Tite Wiring # 119178KIT (installation video linked below)
Sportframe Drawbar 5/8 inch Rise, part # 3590
Hitch Ball with 2 inch Diameter and Short Shank, part # 19258
Hitch Ball with 1-7/8 inch Diameter and Short Shank, part # 19256
Products Referenced in This Question
TremPro 644 Silicone Sealant - 10.1-Fl-Oz Cartridge - White
- Lubricants Sealants Adhesives
- Sealant
- Multi-Purpose Sealant
- 10.1 oz
- Flint Hill Goods
more information >
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >