Trailer Hubs For a Spindle that is 1-1/4 Inches
Question:
Looking for two trailer hubs bearing has to fit 1-1/4 spindle
asked by: Jeff
Helpful Expert Reply:
If the hubs you need are replacements, the easiest way to find new ones would be to check the inner and outer bearing numbers of your previous hub, which will be stamped right on the side of the bearings. If those are worn or otherwise unavailable, you could use a digital caliper such as # PTW80157 and measure your 1-1/4" spindle to three decimal places. You can use the photo I've attached as a reference for where to measure.
You are also going to need to know your wheel bolt pattern to get the correct hub. I have attached a help article on how to find bolt pattern as well as an article on bearings which you should find useful.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Where are the Bearings for the eTrailer Trailer Hubs Made
- Q&A: Replacement Bearings, Races and Oil Seals for Ranger Tandem Axle Boat Trailer with Cool Oil Hubs
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Ranger Trailer Cool Hub Replacement Grease Seal AD2527E
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement EZ Loadr Boat Trailer Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle