Replacement 3,500 lb 10 inch Brakes and Hubs for Aztec Trailer
Question:
Hi I need to replace my brakes on my trailer, is an Aztec 6x10 tandem axle with a 10 inch drum and 6 lugs I think is a 3500 lbs axle and need the drums and the electric brakes on both sides, whats available for this application?
asked by: Mario
Helpful Expert Reply:
For replacement brake assemblies you'd want the part # AKEBRK-35-SA. These are 3,500 lb 10-inch diameter brake assemblies that will fit and work well.
For 6 lug hub/drums the part # AKHD-655-35-EZ-K would then work for both sides as well.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle