Replacement Hub Assembly for Tapered 3/4 spindle
Question:
Hi I am looking for replacement hubs for a 4 on 4 inch bolt pattern that fits a tapered spindle. The inner bearings are L44649 and the outer bearings are LM11949. The spindle measures 3/4 inch out to the threads and it increases in width to 1-1/16 inch towards the axle. I would like to fully replace the hubs with all new bearings, seals and components. However, if there is no hub that will fit this spindle then what would be all my replacement seals that I would need to rebuild this assembly. Thank you
asked by: Scott
Expert Reply:
We do have one hub that will work with 3/4 inch spindle # TRU54FR, but this particular spindle measures larger than 1-1/16 inches towards the axle and does not work with the same bearings. The hub, # AH15450ECOMP, also has a 4 on 5 bolt pattern. The grease seal is also going to depend on the measurements of your spindle and we do not have any matching the dimensions you gave.
We do have the correct replacement bearings # LM11949 with matching race # LM11910 and # L44649 with matching race # L44610.
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for LM11949 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.781 Inch O.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Trailer Spindles
- Agricultural Spindle
- 1-5/8 Inch Diameter
- Round
- For 3000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: grease seal 125 id
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Search Results: t1721400042
- Search Results: trailer hub kit
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Q&A: Trailer Hub That Fits a Spindle With 1-1/4" Inner Bearing and 3/4" Outer Bearing
- Q&A: Idler Hub for Trailer Axle with 1-1/16 Inch and 3/4 Inch Tapered Spindle
- Search Results: 2000 lb axle bearing kit
- Q&A: Raising Trailer with Welded On Torsion Axles
- Q&A: Recommended Trailer Hub with 1-1/4 Diameter Inner Bearing and 3/4 Diameter Outer Bearing
- Search Results: trailer axle
- Search Results: lm11949
- Search Results: 36 inch axle
- Q&A: Will 1-3/4 Inch Wide Leaf Springs Fit a U-Bolt Plate for a 1-1/2 Inch Wide Square Axle
- Q&A: Will a 175/80-13 Trailer Tire and Wheel Fit in Place of a 5.30-12 Trailer Tire and Wheel
- Q&A: Locating Replacement Trailer Hubs and Drums for Mobile Home Axle
- Video: Review of etrailer by AxleTek Trailer Axles - 2,000 lbs 60 Inch Long Axle with Idler Hubs - e84YR