How To Determine What Replacement Hubs And Wheels Will Work On Trailer
Question:
Hello ,Im looking for rim for a trailer with a 3 1/2 on 5 bolt pattern,I think .any suggestions. Thank you
asked by: Gary S
Expert Reply:
It looks like your hub is actually a 4 on 4-1/2. These are no longer being manufactured so you may be better off replacing it.
The easiest way to find a hub that will work with your spindles is to remove the bearings and look for the numbers on the side of the bearing. I have attached a photo that shows where the numbers should be found. If you are unable to find the numbers you will need a digital caliper like part # PTW80157 to measure the spindle in the locations noted in the attachment. Let us know what dimensions you come up with and I will be glad to make some recommendations that will work for you.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Replacement Grease Seal 225255UC for 2015 Wesco Trailer
- Q&A: Can Dexter E-Z Flex Suspension Kit Replace Dexter 13-10 Equalizer
- Q&A: Replacement for a TDE LP8500 Boat Trailer Acuator
- Article: How to Survive the Winter In Your RV
- Q&A: RV Slide Topper Awning For A 154 Inch Slide Out Box
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Wiring Harness Recommendation for 2017 Lexus RX 350 with Towing Package
- Q&A: Does The LaSalle Bristol RV Roof Membrane Ship Folded Or Rolled Up
- Q&A: Recommended Replacement Hubs For BT-150 Trailer Idler Hubs
- Article: Most Popular Wheel Bearings
- Article: Testing Trailer Brake Magnets for Proper Function