Are There Instructions Included with Trailer Coupler Mounting
Question:
I would like to order this coupler, ONLY if I can get instructions with it, that shows how to install it. The old parts were lost when it came apart. The ball is 1 7/8. and the side to side measurement is 2 inches.Can this be done?
asked by: John
0
Expert Reply:
There are not any instructions included with the Trailer Coupler 1-7/8 inch Ball 2 inch Channel Tongue 2,000 lbs, part # E112000340. That is because there are two ways it can be mounted. It can be either bolted or welded on, it is up to the trailer owner how he prefers to mount the coupler.
expert reply by:
Andi
0
Product Page this Question was Asked From
Fulton Fas-Lok Coupler, 1-7/8" Ball, 2" Channel - 2,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 1-7/8 Inch Ball Coupler
- Bolt-On
- 2000 lbs GTW
- 2 Inch Channel
- Trigger Latch
- Fulton
more information >
Continue Researching
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Picking Out Bearing Kit for Trailer with 2,000 lb Axles
- Q&A: Trailer Hubs for Old Boat Trailer with 1 Inch Diameter Spindles
- Q&A: Benefits of Changing to Larger Diameter Radial Trailer Tires on Travel Trailer
- Q&A: Trailer Wheels for a 1984 Holsclaw Trailer
- Q&A: What is the Trade-off Between Wider and Narrower Tires?
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Q&A: Offset of Wheel Used on Kenda 4.80/4.00-8 Bias Trailer Tire with 8 inch White Steel Wheel # AM30000