How To Adjust Reese Dual Cam High-Performance Sway Control # RP26002
Question:
I purchased a reese dual cam set up for my trailer from you and as you can see in the photo, when it comes to making the final adjustments by loosining the two bolts and making a few righr and left turns to center the cams, it has a extra bar on it inabling the adjustment bar from moving up and back. if you look at your video, the reese cam looks different from the one I bought hhen I purchased my Straight line hitch set up. Please help.
asked by: John F
Expert Reply:
When making the final adjustment for the Reese Dual Cam High-Performance Sway Control, part # RP26002, the 2 nuts should be loose before making the left and right turns. Having the nuts loose will allow them to move and settle into the correct position. Then you will want to drive straight approximately 100 yards and then tighten the 2 nuts down.
I have linked instructions and an installation video of the Reese Dual Cam High-Performance Sway Control, part # RP26002.
Product Page this Question was Asked From
Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Video: Reese Dual Cam High-Performance Sway Control Review and Installation
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Shop: ProPride 3P Weight Distribution Hitch w/ Sway Control for 3" Receivers - 14K GTW, 1.4K TW
- Q&A: How to Adjust Hitch Head Angle of Reese Strait-Line Weight Distribution Hitch # RP66074
- Shop: Replacement Trunnion Spring Bar for Reese Weight Distribution System - 800 lbs TW
- Search Results: reese dual cam hitch
- Q&A: Making Adjustments to Reese Dual-Cam Sway Control
- Shop: Reese Dual Cam II Weight Distribution System w/ Active Sway Control - No Shank - 8K GTW - 800 TW
- Shop: Replacement Trunnion Spring Bar for Reese Weight Distribution System - 1,200 lbs TW
- Shop: Tuson Asymmetric Sway Control - 1 to 4 Axles
- Q&A: U-bolts for 26000 Dual Cam Sway Control, # 58000, To Fit 5 Inch Frame
- Q&A: Should Hitch Ball Angle Be Adjusted Up and Down or Angled to the Rear Using Weight Distribution
- Search Results: tongue weight scale
- Shop: Front Mount Hitch
- Article: Determining Trailer Tongue Weight
- Search Results: anti sway hitch
- Search Results: sway control
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Video: Review of Reese Weight Distribution - WD With Sway Control - RP66073
- Video: Reese Strait-Line Weight Distribution System Review RP66082
- Search Results: leaf spring helper
- Search Results: reese tow bar
- Video: Gorilla-Lift Utility Trailer Tailgate Lift Assist Review
- Video: Gorilla-Lift Tailgate - Trailer Tailgate - GL1 Review
- Search Results: maxxair
- Q&A: Overall Length of the Replacement Trunnion Spring Bar Part # RP22225
- Q&A: Trunnion Bars for Use in Reese Dual Cam and Dual Cam High Performance Weight Distribution Systems
- Shop: Trailer Hitch
- Video: Review of Reese - Weight Distribution - RP58507