Availability of Cargo Carrier to Carry Scooter on 2004 Mitsubishi Outlander With 1-1/4 inch hitch
Question:
Do you have a carrier for a scooter that is approximately 94lbs? The car is a 2004 Mitsubishi Outlander With a class I hitch
asked by: Jennifer W
Expert Reply:
Since you have a Class I trailer hitch receiver, that means you have a 1-1/4 inch opening in your receiver so none of our cargo carriers that use a ramp would be compatible as they are all made for 2 inch receivers. You could use an adapter for the carrier but the problem is that it would cut the Tongue Weight (TW) rating of your trailer hitch in half.
We do have some cargo carriers like the Curt # C18145 which can carry up to 500 lbs so your hitch receiver would be the limiting factor, but I doubt you would want to lift a 94 lb scooter up into a cargo carrier.
Because of all of this the best way for you to carry your scooter would be to get a small trailer to haul it around in. To accomplish this you will also need a ball mount, hitch ball, and trailer wiring. You will also want to check your owner's manual for any specifications for towing.
To determine which ball mount option would be the best for you I have attached a helpful article that explains how to determine Rise/Drop as well as a link to our selection of Class I ball mounts for you to look through. You can use a hitch ball with either a 1-7/8 inch Diameter # 19256 or 2 inch Diameter # 19258 depending on what your trailer requires. These hitch balls have 3/4 inch shanks.
For trailer wiring I recommend the Curt Powered Tail Light Converter # C59236 which will provide you with a 4-Pole connector. I have attached an installation video of the similar harness that you can use as a reference.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Heavy Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Heavy Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4?
- Q&A: Height of Timbren Rear Suspension Enhancement System # TGMRCK25D
- Article: Rooftop Cargo Carriers
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Will Replacement Digital Remote Work With Fantastic Vent 7300
- Article: Cargo Tie-Down Methods
- Q&A: Dimensions of the Curt Trailer Hitch item # C96CR
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Does Trailer Hitch For 2024 Hyundai Venue Have Concealed Crosstube
- Q&A: Enclosed Hitch Cargo Carrier Recommendation for Clearing Rear Spare of Jeep Wrangler
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Ball Mount Basics: Weight Capacity, Class, and Size