Trailer Hitch for Kodiak Trailblazer T277FS 5th Wheel Trailer
Question:
I have a 2008 Kodiak Trailblazer 5th wheel trailer Mod# T277FS that I would like to install a receiver hitch on for towing a boat. Is there a hitch receiver that is available that would work for my application? There are I-Beam frame rails that extend to the rear of the trailer to which the existing bumper is welded. I believe they are 5inch I-beams.
asked by: James
Expert Reply:
We do offer both bumper-mount and frame-mount hitches specifically intended for RV and trailer applications like your Kodiak Trailblazer 5th wheel. All are shown on the linked page.
Some RV bumpers are welded securely enough to allow use of a bumper-mounted hitch like # UF35-946402. Other can use a frame-mounted hitch like # C13701 or # C13702, both of which fit frame widths from 18- to 51-inches. Either hitch can be bolted or welded on. Part # C13701 provides 2-inches of height drop for the receiver, which can be helpful when towing with a taller RV.
You will just want to measure the trailer frame outside width to confirm compatibility; if wider than 51-inches we do show other options on the page. You will also want to check with the trailer maker using your VIN to confirm that either bumper- or frame-mount hitches can be used on your particular RV.
Laws do vary by state concerning the towing of a trailer with a trailer so it will also be a good idea to check with the highway patrol in the area where you intend to travel.
Products Referenced in This Question
Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 18 - 51 Inch Wide Frame
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs
- RV and Camper Hitch
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 100 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Ultra-Fab Products
more information >
Product Page this Question was Asked From
Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2"
- RV and Camper Hitch
- Frame Mount Hitch
- 18 - 51 Inch Wide Frame
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Lift Motor for Fantastic Vent in 2002 Teton 5th-Wheel Trailer
- Q&A: How To Activate 12V Trailer Charge Circuit On 2019 Ford Super Duty With Factory 7-Way
- Q&A: Can 2019 GMC Sierra 1500 Denali be Flat Towed and Parts Needed
- Article: How Harvest Hosts Is Becoming the New Standard of the Camping Industry
- Q&A: Troubleshooting Curt Echo Brake Controller Not Getting Power/Not Connecting to iPhone
- Q&A: Recommended Trailer Hitch Receiver For A 1992 Ford E-350 Shuttle Bus
- Q&A: Hitch Recommendation for a Ford E-450 Bus
- Q&A: Do The Puck Feet Of The Gen-Y Hitch Gooseneck Trailer Hitch For Puck Systems Lock Into Place
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Best Bike Racks for Electric Bikes