Parts Needed to Flat Tow a 1999 Chevrolet Venture Behind an RV
Question:
base plate to work with this simple bar
asked by: Robert H
Expert Reply:
For your 1999 Chevy Venture we have the Roadmaster base plate kit part # 191-1 which is a confirmed fit and would work well with the Roadmaster Tracker Tow Bar part # RM-020 that you referenced as well.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs
- Tow Bar
- Coupler Style
- Fixed
- Steel
- 5000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Stores Separately
- Standard
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: What Is a Supplemental Braking System?
- Article: Must-Have Flat Towing Components
- Q&A: Will Roadmaster XL Base Plate Kit # 278-1 Fit a 2006 Chrysler PT Cruiser
- Article: Trailer Wiring Diagrams
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Q&A: Can I Tow a 2020 Honda Civic Sport Behind My Motorhome
- Article: Flat Towing Package for 2011 Chevrolet HHR
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
- Q&A: What Parts Are Needed To Tow A 1997 Honda Civic With A RV
- Q&A: Wiring For Lights When Dinghy Towing 2015 Kia Soul
- Q&A: Needed Equipment to Flat Tow a 2001 PT Cruiser Behind Motor Home
- Article: Flat Towing Package for 2010-2011 Jeep Liberty
- Q&A: Will RoadMaster XL Base Plate Kit Part # 278-1 Fit my 2009 Chrysler PT Cruiser