Trailer Hitch and Wiring Recommendations for a 2015 Subaru Forester XT
Question:
I would like to install the a trailer hitch on to my 2015 Subaru Forester XT. Is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2inch compatible with the XT model it has 2 exhaust. If not, can you recommend a suitable make/model? Also can you recommend dealers/installers in San Diego, CA. Thanks.
asked by: Kim H
Expert Reply:
I checked with Draw-Tite and hitch # 75876 is a fit for all models of the 2015 Subaru Forester so that would include your XT model with dual exhaust. I have linked a video showing an example installation for you. Any trusted mechanic or RV dealer with a service center can perform the installation. I recommend calling a few local places to see what they might charge.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For a trailer wiring harness you can use # 118467 to add a 4-Way flat connector to the rear of the vehicle. I have linked a video showing how it installs as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Selecting the Correct Curt T-Connector Wiring Harness For a 2022 Ford Bronco
- Q&A: Brake Controller for 2019 Ford Edge With Factory Tow Package
- Q&A: Roof Rack and Cargo Basket Recommendation for 2015 Honda CR-V with Naked Roof
- Q&A: Aero Bar Roof Rack that Fits 2022 Toyota Highlander
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Trailer Hub Recommendation to Replace Dexter 8-155
- Q&A: Replacement Oil Seal for AL-KO 568303
- Q&A: Does Replacement Brass Connector # T4750300 Fit Dexter DX6.6 Actuator
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Rooftop Cargo Carriers
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: What Do I Need To Tow A Trailer?