How To Tow A 2-Wire Trailer System With A 3-Wire Vehicle System
Question:
Hi, I have a truck that has separate wires for the signal lights and the brake lights. The trailer is set up with the brake lights and signal lights on the same wire. How can I hook up my trailer lights with out causing both signals to blink? Do you have a converter/adapter or something to take care of this problem? Thanks for any suggestions,
asked by: Robert W
Expert Reply:
In order to tow a trailer that has a 2-wire lighting circuit with a truck that has a 3-wire lighting circuit, you will need a converter box system such as the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness with Installation Kit # 119250KIT. This will allow you to use the 3-wire system on your vehicle with the 2-wire system on your trailer.
If your trailer has a 7-way connector, you will also need to install an adapter such as the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185 in order for you to hook up the 7-way on you trailer to the 4-way on your vehicle.
We may have a plug and play option for you however, I would need to know your vehicle's year, make, and model in order for me to be able to offer my recommendation. I have included a review video of each product for you.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Stability Control for Heavy Duty Vehicles
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Which Bolt Locking Hitch Pin Can be Keyed to a 2014 GMC Sierra 1500
- Q&A: Adjusting Dexter 10K Electric Trailer Brakes
- Q&A: Does BOLT Trailer Hitch Receiver Lock For GM Center Cut Key Fit 2021 Chevy Silverado
- Q&A: Will Bolt Trailer Hitch Lock part # BL7023582 Fit 2-1/2 inch Hitch on a 2011 GMC Sierra
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Antennas for Voyager WiSight Wireless Backup System
- Q&A: Replacement Microwave for Highpoint # EC942K9
- Q&A: Replacement Microwave for my High Pointe EC942K9E in Stainless